Eticaretbox Logo Aramaya Dön
ANSCHUTZ LP MÜSABAKA TABANCASI
Anschutz

ANSCHUTZ LP MÜSABAKA TABANCASI

150.916,29 TRY
Son fiyat kontrolü: 08.05.2026 09:28
Mağazaya Git

Ürün Açıklaması

The Anschutz LP@ is in effect a slightly modified Steyr LP10, complete with recoil absorber, but different style grip, no barrel shroud and an independent weight bar. Both factories have worked together since 2002, sharing manufacture of components for their air pistol lines.Sight AdjustmentsClockwise down (left hand knob).Clockwise left (right hand knob).1 click = 1.2mm @ 10m.Adjustable rear NotchTurn screw on right hand side clockwise or left hand anti-clockwise to increase sight aperture width, opposite to decrease. Adjustment is 0 - 5.0mm.Depth may be adjusted by loosening screws holding cover plate in place, and lowering or raising cover plate to desired position before retightening. Adjustment is 1.8 - 2.6mm.Front SightA triangular front sight comes standard, with three different widths. By loosening set screw holding it in place, it can be rotated to give 3.5, 4.0 or 4.5mm width front sight.Grip AdjustmentThe grip is adjustable and pivotable in relation to the pistol in all directions. It can therefore be adjusted to most any possible shooting stance and hand position.To adjust, first remove grip by unscrewing allen screw in base of grip.Adjustments are made by positioning of countersunk screws located at the bottom and rear of the receiver, as shown in the diagram. Dry FiringPull cocking lever up and rearward until it clicks.Push it forward and down until you feel a first resistance. From the left hand side you will see the letter "T" (Train). Pistol can now be dry fired, with no expulsion of gas.Note: When pistol is cocked for live fire, lever is pushed down hard, and the letter "F" will be visible (Fire).Trigger AdjustmentsTrigger StopTurn screw C clockwise to shorten after travel.Note: If screw is tightened too far pistol will not fire.First Stage WeightTurn screw D clockwise to increase first stage trigger weight.First Stage TravelTurn screw E clockwise to shorten first stage travel, counter-clockwise to lengthen.After adjusting 1st Stage Travel the trig...