Bambu Lab A1 3D Printer

Ürün Açıklaması

AçıklamalarActive Flow Rate CompensationThe A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.Full Auto CalibrationThe A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. Quick Swap NozzleAll-new quick swap hotend design, the hotend pops in and out with just 1-Clip Active Motor Noise CancellingThe A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise. Bed Slinger, with CoreXY Speed And QualityFull-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.Sync with Bambu Studio and Bambu HandyRemote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos. Bambu Lab A1 Tech SpecsItemA1 SpecificationBodyBuild Volume(W*D*H)256*256*256 mm³ToolheadHot EndAll-MetalNozzleStainless SteelMax Hot End Temperature300 °CNozzle Diameter0.4 mm (Included)0.2 mm, 0.6 mm, 0.8 mmHeatbedBuild PlateBambu Textured PEI Plate (Included)Bambu High Temperature Plate (Smooth PEI)Bambu Cool PlateMax Build Plate Temperature100°CSpeedMax Speed of Tool Head500mm/sMax Acceleration of Tool Head10m/s²Supported FilamentPLA, PETG, TPU, PVAIdealABS, ASA, PC, PA, PET,Carbon/Glass Fiber Reinforced PolymerNot RecommendedSensorsChamber Monitoring CameraLow Frame Rate Camera (Up to 1080P)Timelapse SupportedFilament Run Out SensorYesFilament OdometryYesPower Loss RecoverYesFilament Ta...