Bambu Lab A1 Mini Combo 3D Printer

Ürün Açıklaması

Açıklamalar Bambu Lab A1 Mini ComboMulti-Color PrintingPlug-N-PlayActive Flow Rate CompensationFull Auto CalibrationActive Motor Noise CancellingHigh Speed PrecisionMulti-Color PrintingThe all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.Active Flow Rate CompensationThe A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.Full Auto CalibrationThe A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. Plug and PlayThe A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print. Active Motor Noise CancellingThe A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise. Bed Slinger, with CoreXY Speed And QualityFull-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.Sync with Bambu Studio and Bambu HandyRemote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos. Bambu Lab A1 Mini Combo Tech SpecsA1 Mini Combo Tech SpecsItemA1 mini SpecificationBodyBuild Volume(W*D*H)180*180*180 mm³ToolheadHot EndAll-MetalNozzleStainless SteelMax Hot End Temperature300 °CNozzle Diameter0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mmHeatbedBuild PlateBambu Textured PEI Plate (Included) Bambu Smooth PEI PlateMax Build Plate Temperature80°CSpeed...