MakeBlock Me Infrared Receiver Decode

Ürün Açıklaması

Description:The Makeblock Me series modules are designed to be simple to wire, easy to program, the controller is compatible with Arduino, each Me-modules comes with an Arduino library for easy programming.Me Infrared Receiver Decode module isdesigned for receiving infrared signals and controlling the robotics from the infrared remote control. The Infrared Receiver can receive signals well within 10 meters. It may be unable to obtain signal from further than 10 meters.We use an MCU instead of IC BC7210 in V3.0. We program it to do the same thing as BC7210. The IR remote controller is under NEC IR protocol. If you need to use other IR protocols, you can try to reprogram it.We also provide an Arduino libraryfor this module and offer easy software interfaces of the decoding signals for the users for easy programming.Features:Better decoder solution thanV2.0Simple control by using a IR control under NEC IR protocolComes with Arduino library for easy programingOver-current protectionEasy wiring with 6 Pin RJ25 interfaceLabeled withblue tagandcompatible with Me Baseboard2.54mm breakout pins for connecting with jumper wires16mm interval M4 mounting holes, compatible with Makeblock beamsTwo on board indicator LEDs for debugging and feedbackTransmission Distance:10 meters in free spaceDimensions:2.4cmx4.8cmNote:The batteryofIR Remote Controllerwill be taken to assure safe transport, you may need to buy it by yourself. The battery size isCR2025.Sorryabout theinconvenience.Documents:SchematicEagle FilesArduino Library